LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Escalade EXT >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Lower Control Arm Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: Supporting Lower Control Arm With Jack Stand
    GM160827Courtesy of GENERAL MOTORS CORP.
  2. Support the lower control arm with a safety stand.
  3. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Remove the stabilizer shaft links from the lower control arm. Refer to Stabilizer Shaft Replacement .
  5. Remove the shock absorber lower nut and the bolt. Refer to Shock Absorber Replacement .
  6. Remove the torsion bars. Refer to Torsion Bar Replacement .
  7. Remove the wheel drive shaft. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts.
    8. Fig 2: Removing/Installing The Lower Ball Joint Retaining Nut
    GM830506Courtesy of GENERAL MOTORS CORP.
  8. Remove the lower ball joint retaining nut.
    9. Fig 3: Separating The Lower Ball Joint From The Steering Knuckle
    GM853943Courtesy of GENERAL MOTORS CORP.
  9. Disconnect the lower ball joint stud from the steering knuckle using J 43631  and J 45851  . See Special Tools and Equipment .
    10. Fig 4: Lower Control Arm, Nuts, Bolts & Washers (15 Series)
    GM348376Courtesy of GENERAL MOTORS CORP.
  10. Remove the lower control arm nuts and the 15-series washers.
  11. Remove the lower control arm bolts.
    12. Fig 5: Lower Control Arm, Nuts, Bolts & Washers (25/35 Series)
    GM348377Courtesy of GENERAL MOTORS CORP.
  12. Remove the lower control arm nuts and the 25/35-series washers.
  13. Remove the lower control arm bolts.
  14. Remove the lower control arm.
scientia non olet · About LEMON Manuals