Installation Procedure
- Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
- Install the instrument panel upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gages and Console.
- Install the rearview mirror. Refer to Rearview Mirror Replacement
- Install the rain sensor. Refer to Windshield Outside Moisture Sensor Replacement in Wipers/Washer Systems.
- Install the windshield side reveal moldings. Refer to Windshield Side Reveal Molding Replacement .
- Install the door sealing weather strip.
- Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement in Body Front End.
- Install the windshield wipers arms. Refer to Wiper Arm Replacement (LHD) or Wiper Arm Replacement (RHD) in Wipers/Washer Systems.
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Close the hood.