Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

Position the sunroof module assembly to the roof opening.
Hand start the sunroof module assembly bolts (1) into the roof.
Insert the J 44363 into the sunroof module alignment holes (2). See Special Tools and Equipment .

NOTE: Refer to Fastener Notice in Cautions and Notices.

Secure the sunroof module assembly to the roof.
Tighten: Tighten the sunroof module bolts (1) to 9 N.m (80 lb in).

Fig 1: View Of Sunroof Module Assembly Roof Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the J 44363 . See Special Tools and Equipment .
Connect the drain hoses to the drain spouts on the sunroof module.

IMPORTANT: When installing the new drain hose tie wraps, position the tie wraps to maintain clearance between the tie wraps and the headliner.

Secure the drain hoses to the sunroof module with new tie wraps.

Fig 2: Hose Routing Views - Front

Courtesy of GENERAL MOTORS CORP.

Connect the electrical harness to the sunroof module assembly.
Install the sunshade. Refer to Sunroof Sunshade Panel Replacement .
Install the sunroof window and loosely install the screws. Refer to Sunroof Window Replacement .
Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment .

IMPORTANT: Test for proper operation of the sunroof before installing the headliner.

Install the headliner. Refer to Headliner Replacement (w/CF5) or Headliner Replacement (w/o CF5) or Headliner Replacement (WC2, WC8) in Interior Trim.