LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Seat System) >> Repair Instructions >> Memory Seat Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the memory seat control module (2) to the driver side seat trim panel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fasteners (3) that retain the memory seat control module to the driver side seat trim panel.

    Tighten:  Tighten the fasteners to 2 N.m (18 lb in).

    3. Fig 1: View Of Memory Seat Control Module, Climate Control Seat Module & Fasteners
    GM1214084Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connectors to the memory seat control module.
  4. Install the driver side seat trim panel. Refer to Trim Panel Replacement - Front Seat .
  5. Install the driver side front seat cushion assembly. Refer to Seat Cushion Replacement - Front .
  6. Calibrate the seat. Refer to Memory Seat Calibration Procedure .
scientia non olet · About LEMON Manuals