LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Seat System) >> Repair Instructions >> Module Replacement - Seat Climate Control - Driver Side >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the climate control module.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fasteners (4) that connect the climate control seat module (1) to the driver side trim panel.

    Tighten:  Tighten the fasteners to 2 N.m (18 lb in).

    3. Fig 1: View Of Memory Seat Control Module, Climate Control Seat Module & Fasteners
    GM1214084Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connectors.
  4. Install the driver side seat trim panel. Refer to Trim Panel Replacement - Front Seat .
  5. Install the seat cushion. Refer to Seat Cushion Replacement - Front .
scientia non olet · About LEMON Manuals