LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> XLR >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Multifunction, Turn Signal Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Connect the multifunction switch electrical connectors.
  2. Install the multifunction switch to the steering column.
    3. Fig 1: Multifunction Switch & Retaining Screws
    GM420196Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the retaining screws to the multifunction switch.

    Tighten:  Tighten the screws to 7 N.m (62 lb in).

  4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  5. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
scientia non olet · About LEMON Manuals