LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Suspension Control System - Suspension Leveling) >> Repair Instructions >> Automatic Level Control Sensor and Bracket Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Ride Sensor
GM1371680Courtesy of GENERAL MOTORS CORP.
  1. Position the sensor to the vehicle.
    NOTE: Refer to Fastener Notice .
  2. Install the ride sensor retaining nut.

    Tighten:  Tighten the nut to 9 N.m (80 lb in).

    Fig 2: Locating Front Ride Sensor Link
    GM1371682Courtesy of GENERAL MOTORS CORP.
  3. Connect the ride sensor link to the upper control arm ball stud.
  4. Connect the ride sensor harness connector.
  5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals