LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Introduction >> Repair Instructions >> Heated Seat Control Module Replacement - Rear >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Heated Seat Module
    GM493757Courtesy of GENERAL MOTORS CORP.
  1. Install the heated seat control module (2) to the seat back.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the heated seat control module fasteners (1).

    Tighten:  Tighten the rear heated seat control module to 1.5 N.m (13 lb. in.).

  3. Connect the heated seat control module electrical connections.
  4. Install the rear seat back. Refer to Seat Back Replacement - Rear (Standard)  or Seat Back Replacement - Rear (WC2, WC8) .
scientia non olet · About LEMON Manuals