LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Introduction >> Repair Instructions >> Massaging Lumbar Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Massaging Lumbar Module
    GM629635Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the massaging lumbar module (1).
  2. Install the massaging lumbar module (1) into the upper corner of the seat back next to the shoulder belt adjuster tower.
    3. Fig 2: View Of Massaging Lumbar Module, Hook & Loop Material, & Cross Brace
    GM629631Courtesy of GENERAL MOTORS CORP.
  3. Hook the tab on the massaging lumbar module (1) to the seat back frame cross brace (3).
  4. Secure the module (1) to the seat belt shoulder strap adjuster tower and seat back cross brace (3) with the hook and loop material (2).
  5. Install the seat back trim panel. Refer to Seat Back Trim Replacement - Front .
scientia non olet · About LEMON Manuals