LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

IMPORTANT:
  • Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
  • Always route the replacement cable the same way as the original cable.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Remove the upper filler panel. Refer to Filler Panel Replacement - Upper in Body Front End.
  3. Remove the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical-4.6L.
    4. Fig 1: View Of Remote Positive Terminal & Nut
    GM516340Courtesy of GENERAL MOTORS CORP.
  4. Remove the nut (1) securing the battery positive cable to the remote positive terminal.
    5. Fig 2: Expanded View Of Starter Motor BAT Terminal Wire
    GM104910Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the starter motor BAT terminal wire from the starter.
    6. Fig 3: View Of Generator Output BAT Terminal Protective Boot
    GM780408Courtesy of GENERAL MOTORS CORP.
  6. Reposition the protective boot from the generator output BAT terminal for access.
  7. Remove the generator output BAT terminal nut and disconnect the positive lead from the generator.
  8. Disconnect the cable harness clips from the front of the camshaft cover.
  9. Remove the generator cable from the vehicle.
scientia non olet · About LEMON Manuals