General Information to Set Up a Dash Integration Module (DIM)
WARNING: This page is about a different car, the 2005 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The Air Bag Indicator light may remain ON after the DIM Module is replaced and during the programming procedure for the DIM until after the procedure is completed and the ignition key is cycled OFF and ON.
Before performing any of the set up procedures ensure the following:
- Ensure the scan tool has been updated with the latest software version.
- Ensure the battery is fully charged.
- Ensure all modules on the serial data line are connected.
To set up a new DIM, the following procedures have to be performed:
- Program the VIN
- Learning the restraints ID
- Setting options