Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- The locator pins (1) are used in order to hold the rear window in position.
- Install the rear window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
Courtesy of GENERAL MOTORS CORP.
- Connect all of the rear window electrical connectors.
- Install the headliner. Refer to Headliner Replacement
in Interior Trim.
- Install the rear sail trim panels. Refer to Sail Panel Replacement
in Interior Trim.
- Install the rear seat back. Refer to Seat Back Replacement - Rear
in Seats.
- Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear
in Seats.
- Cycle the rear compartment lid open and close in order to position the lower reveal molding under the rear compartment lid.
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.