LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> XLR >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Introduction & Repair Instructions >> Repair Instructions >> Input Speed Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the transmission fluid pan and filter. Refer to Automatic Transmission Fluid/Filter Replacement .
    2. Fig 1: View Of Input Speed Sensor & Electrical Wiring Harness Connector
    GM795916Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical wiring harness connector (1) from the input speed sensor (2).
    3. Fig 2: View Of Input Speed Sensor & Bolt
    GM812729Courtesy of GENERAL MOTORS CORP.
  3. Remove the input speed sensor bolt (2).
  4. Remove the input speed sensor (1).
  5. Inspect the input speed sensor (1) for the following conditions:
    • Damaged or missing magnet
    • Damaged housing
    • Bent or missing electrical terminals
    • Metal contamination stuck to magnet
scientia non olet · About LEMON Manuals