LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> XLR >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Introduction & Repair Instructions >> Repair Instructions >> Output Speed Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Output Speed Sensor & Bolt
    GM812728Courtesy of GENERAL MOTORS CORP.
  1. Install the output speed sensor spacer (1).
  2. Install the output speed sensor (2).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the output speed sensor bolt (3).

    Tighten:  Tighten the output speed sensor bolt to 11 N.m (97 lb in).

    4. Fig 2: View Of Output Speed Sensor & Electrical Wiring Harness Connector
    GM795914Courtesy of GENERAL MOTORS CORP.
  4. Connect the electrical wiring harness connector (3) to the output speed sensor (2).
  5. Install the transmission fluid pan and filter. Refer to Automatic Transmission Fluid/Filter Replacement .
scientia non olet · About LEMON Manuals