Removal Procedure
IMPORTANT:
The replacement TCM MUST be programmed. Refer to Service Programming System (SPS)
in Programming.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the right front wheelhouse panel. Refer to Wheelhouse Filler Replacement in Body Front End.
- Remove the engine control module (ECM) bracket.
- Disconnect the electrical connector from the transmission control module (TCM).
- Remove the fasteners securing the transmission control Module (TCM) to the engine control module (ECM) bracket.
- Remove the transmission control module (TCM).