Frame Contact Lift

FRAME CONTACT HOIST

FRONT HOIST PADS

IMPORTANT: The front hoist pads must not contact the rocker panels, the front fenders, the floor pan, or the stone guard moldings. Remove the jacking covers from the rocker panels if necessary.




Position the frame contact front hoist pads as follows:
- Under the front frame rail reinforcement.
- The long sides of the pads, if applicable parallel to the frame rails.

REAR HOIST PADS

IMPORTANT: The rear hoist pads must not contact the rocker panels, the rear fenders, the floor pan, or the stone guard moldings. Remove the jacking covers from the rocker panels if necessary.




Position the frame contact rear hoist pads as follows:
- Under the rear frame rail at the rear axle cradle mount flange.
- The long sides of the pads, if applicable perpendicular to the frame rails.