Radio Control Assembly Replacement (without Navigation Display)

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radio Control Assembly Replacement (without Navigation Display)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the Front Floor Console Transmission Shifter Trim Plate Assembly. Refer to Front Floor Console Transmission Shift Opening Trim Plate Replacement (Automatic Transmission) or Front Floor Console Transmission Shift Opening Trim Plate Replacement (Manual Transmission) .
1	Instrument Panel Upper Cover. Refer to Radio Control Assembly Replacement (with Navigation Display) or Radio Control Assembly Replacement (without Navigation Display) .
2	AM/FM Stereo and Clock and Audio Disc Player Radio Control Screws (Qty 2) NOTE: Refer to Fastener Notice Fastener Notice. Tighten: 2.5 N.m (22 lb in)
3	AM/FM Stereo and Clock and Audio Disc Player Radio Control Assembly Procedure Use a flat bladed plastic trim tool in order to release the retainer clips securing the AM/FM Stereo and Clock and Audio Disc Player Radio Control Assembly to the instrument panel. Disconnect the electrical connections. When replacing the AM/FM Stereo and Clock and Audio Disc Player Radio Control Assembly, transfer all necessary components. Refer to Control Module References for programming and setup information.