LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> STS V >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.4L - Introduction (2 Of 2) >> Repair Instructions >> Intake Air Temperature (IAT) Sensor 2 Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Remove the intake manifold sight shield. Refer to Intake Manifold Sight Shield Replacement .
    2. Fig 1: Intake Air Temperature (IAT) Sensor Connector
    GM1645247Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the intake air temperature (IAT) sensor 2 electrical connector.
    3. Fig 2: Intake Air Temperature (IAT) Sensor
    GM1613989Courtesy of GENERAL MOTORS CORP.
  3. Remove the IAT sensor 2 (1).
scientia non olet · About LEMON Manuals