LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> STS V >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

IMPORTANT: During installation ensure that the child tether anchors are installed with the anti-rotation tabs firmly seated in the anti-rotation tab holes on the cross car beam.
    Fig 1: Child Tether Anchor & Bolt
    GM729861Courtesy of GENERAL MOTORS CORP.
  1. Install the child tether anchor to the cross car beam.
  2. NOTE: Refer to Fastener Notice .
  3. Install the child tether anchor bolt.

    Tighten:  Tighten the bolt to 30 N.m (22 lb ft).

  4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .