Installation Procedure
WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Install the radio control module (1) to the mounting bracket.
- Connect all the electrical connectors.
- Install the headliner.
- Install the rear park assist display.
- Install the rear coat hooks.
Tighten: Tighten the fasteners to 10 N.m (88 lb in).
- Install the front quarter trim panels. Refer to Garnish Molding Replacement - Side Door Opening Frame .
- Install the rear quarter trim panels. Refer to Garnish Molding Replacement - Body Side Rear Upper .
- Install the rear opening weatherstrip.
- Reprogram the keyless entry transmitter. Refer to Transmitter Programming in Keyless Entry.
- Reprogram the tire pressure sensors. Refer to Tire Pressure Sensor Learn in Tire Pressure Monitoring.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.