Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connectors.
Locate the module the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the nuts (1) securing the processor to the vehicle.
Tighten: Tighten the nuts to 9 N.m (80 lb in).

Fig 1: View Of TV Antenna Module

Courtesy of GENERAL MOTORS CORP.

Install the right rear body side trim panel. Refer to Trim Panel Replacement - Body Side Rear in Interior Trim.