LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> CTS Base, 2.8 T, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Bracket Replacement (LS2) >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Locating Generator Bracket To Engine & Mounting Bolts
    GM1455612Courtesy of GENERAL MOTORS CORP.
  1. Install the generator bracket to the engine.
    2. NOTE: Refer to Fastener Notice .
  2. Install the generator bracket bolts.

    Tighten:  Tighten the generator bracket bolts to 50 N.m (37 lb ft).

  3. Install the accessory drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement .
  4. Install the generator. Refer to Generator Replacement (LP1, LY7)  or Generator Replacement (LS2) .
  5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals