Installation Procedure
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- If installing a new trailer brake control module, hand start the 3 trailer brake control module bolts.
- Position the trailer brake control module to the frame bracket.
- Slide the trailer brake control module (1) toward the left frame rail.
- Tighten the trailer brake control module bolts (1) to 9 N.m (80 lb in).
- Connect the trailer brake control module electrical connector.
- Install the spare tire and wheel assembly. Refer to Spare Wheel Hoist Replacement .
- If installing a new trailer brake control module, program the module. Refer to Control Module References .
CAUTION:
Refer to Fastener Caution
.