LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 669 (Entertainment Systems) >> Repair Instructions >> Radio Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the coaxial cable to the radio.
  2. Connect the wire connectors.
  3. Push in the radio assembly in the opening in order to install the screws.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Installing Radio Screws
    GM854851Courtesy of GENERAL MOTORS CORP.
  4. Install the 3 screws (1).

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  5. Install the cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.
  6. Calibrate the new radio assembly. Refer to Service Programming System (SPS) in Programming.
scientia non olet · About LEMON Manuals