Dismounting/Mounting Procedures: Notes

CAUTION: The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.

CAUTION: If vehicle is equipped with "run-flat" tires, it is recommended that only specially trained technicians dismount/mount these tires. A tire inflation safety cage and clip-on air hose are required, and a rim clamp style tire changer is recommended.

NOTE: If vehicle's tires are replaced with those not having a TPC Spec number, the TPM system may give an inaccurate low pressure warning. Non-TPC Spec tires may give a low pressure warning that is higher or lower than the proper warning level achieved by TPC Spec numbered tires.

NOTE: If a tire pressure sensor or the RCDLR is replaced, or if wheels have been rotated, tire pressure sensors must be relearned. See RESET PROCEDURES .

NOTE: On some STS models, the front and rear tires are different sizes, and tire rotation is not recommended. Follow vehicle manufacturer's recommended procedures.