Headlamp Control Module
- AFS Disable Indication
-
The scan tool displays Off or On. Indicates the status of the adaptive forward lighting system (AFS).
- Auto Headlamp Status
-
The scan tool displays Off or On. Indicates the state of the headlamps switch when placed in the AUTO position.
- Auto Hdlp. Signal Present
-
The scan tool displays Yes or No. Indicates the state of the headlamps switch when placed in the AUTO position.
- Component Serial No. 13-16
-
The scan tool displays the third partition of the door module serial number.
- Headlamp Control Motor Status
-
The scan tool displays Off/Active/Hold/Homing/Forward/Disabled/Invalid. Indicates the status of the headlamp control motors input.
- Ignition 1
-
The scan tool displays Active or Inactive. Indicates the state of the ignition 1 voltage input.
- Julian Date Of Build
-
The scan tool displays a number representing the day of the year the module selected was built.
- Left Hdlp. Motor Position
-
The scan tool displays Counts. This is the value that represents how much the headlamps are being moved to the left position.
- Right Hdlp. Motor Position
-
The scan tool displays Counts. This is the value that represents how much the headlamps are being moved to the right direction.
- Software Part Number
-
The scan tool displays the part number for the current level software.
- Year Module Built
-
The scan tool displays the four digit year of build for the module selected.