April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Remove the rear fascia. Refer to Rear Bumper Fascia Replacement .

Fig 1: View Of Rear Object Sensor Electrical Connector

GM1238910

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector (1) from the rear object sensor.

Fig 2: View Of Sensor Housing Locking Tabs

GM1238909

Courtesy of GENERAL MOTORS CORP.

Release the locking tabs (1) attaching the sensor to the sensor housing.

Fig 3: View Of Rear Object Sensor

GM1238906

Courtesy of GENERAL MOTORS CORP.

Remove the rear object sensor (1) from the sensor housing.

Fig 4: View Of Rear Object Sensor Retainer Ring

GM1238903

Courtesy of GENERAL MOTORS CORP.

Remove the rear object sensor retainer ring (1) from the sensor.