Circuit/System Testing
WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the X3 harness connector at the audio amplifier.
- Ignition ON, radio ON, test for 0.6-1.0 volts between the control circuit terminal 11 and ground.
- If greater than the specified range, test the control circuit for a short to voltage. If the circuit tests normal, replace the radio.
- If less than the specified range, test the control circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the radio.
- If all circuits test normal, replace the audio amplifier.