Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Navigation Data Processor Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors (1, 2)

Fig 2: Locating Navigation Data Processor Nuts

Courtesy of GENERAL MOTORS CORP.

Locate the processor the vehicle.

NOTE: Refer to Fastener Notice .

Install the nuts (1) securing the processor to the vehicle.
Tighten: Tighten the nuts to 9 N.m (80 lb in).
Install the left rear body side trim panel. Refer to Body Side Rear Trim Panel Replacement (w/TB5) or Body Side Rear Trim Panel Replacement (w/o TB5) .