LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2008 >> CTS 3.6 7, AWD >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Front Wheel Speed Sensor Replacement (AWD) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

CAUTION: Refer to Brake Dust Caution .
    Fig 1: Wheel Speed Sensor Electrical Connector
    GM1969809Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Disconnect the wheel speed sensor electrical connector (1).
  4. Remove the wheel speed sensor wire harness clips (2) from the stabilizer bar bracket.
    5. Fig 2: View of Wheel Speed Sensor Wire Harness Clip
    GM1969812Courtesy of GENERAL MOTORS CORP.
  5. Remove the wheel speed sensor wire harness clip (1) from the steering knuckle.
    6. Fig 3: Wheel Speed Sensor Bolt
    GM1969815Courtesy of GENERAL MOTORS CORP.
  6. Thoroughly clean the wheel speed sensor mounting area of the steering knuckle of any dirt and debris.
  7. Remove the wheel speed sensor bolt (1).
    8. Fig 4: Wheel Speed Sensor
    GM1969821Courtesy of GENERAL MOTORS CORP.
  8. Remove the wheel speed sensor (1) from the steering knuckle.
scientia non olet · About LEMON Manuals