Circuit/System Verification
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Auxiliary Audio Input Jack
- Verify no DTCs are present.
- If any DTCs are present, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Ignition ON, radio ON, connect a portable audio playback device to the auxiliary audio input jack on the radio. Verify the infotainment system to switches AUX as the audio source.
- If the infotainment system does not switch to AUX as the audio source, replace the radio.
- Operate the device to begin audio playback, adjusting the volume on the device if necessary. Verify the audio from the device is heard through the vehicle infotainment system.
- If audio is not heard from the device, attempt to playback audio from another device. If audio cannot be heard from any device connected to the auxiliary audio input jack, replace the radio.
USB Port
- Verify no DTCs are present.
- If any DTCs are present, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Inspect the USB port for damage.
- If damage is noted, replace the USB port.
- Ignition ON, radio ON, connect a device to the USB port. Verify the infotainment system to switches USB as the audio source.
- If the infotainment system does not switch to USB as the audio source, refer to Circuit/System Testing below.
- Operate the radio controls to play audio from the device. Verify the audio from the device is heard through the vehicle infotainment system.
- If audio is not heard from the device, attempt to playback audio from another device. If audio cannot be heard from any device connected to the USB port, or the audio heard is not clear, refer to Circuit/System Testing below.