LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> CTS V, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.2L - Introduction >> Repair Instructions >> Filler Tube Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Position the fuel filler tube to the vehicle.
    2. Fig 1: Identifying Fuel Filler Hose & Filler Vent Tube
    GM785808Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Component Fastener Tightening Caution .
  2. Connect the filler hose (1) to the fuel tank and tighten to 3.5 N.m (31 lb in).
  3. Connect the filler vent tube (2) to the EVAP hose. Refer to Evaporative Emission System Hoses/Pipes Replacement .
    4. Fig 2: View Of Fuel Filler Tube Brace Bolt
    GM785809Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  4. Install the fuel filler tube brace bolt and tighten to 9 N.m (80 lb in).
    5. Fig 3: View Of Fuel Filler Tube Bolts
    GM785810Courtesy of GENERAL MOTORS CORP.
  5. Install the bolts securing the fuel filler tube to the body and tighten to 3.5 N.m (31 lb in).
  6. Install the right rear wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement .
  7. Install the right rear wheel. Refer to Tire and Wheel Removal and Installation .
  8. Add fuel to the fuel tank.
  9. Inspect for fuel leaks.
  10. Install the fuel filler cap.
scientia non olet · About LEMON Manuals