LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> CTS V, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.2L - Introduction >> Repair Instructions >> Knock Sensor 2 Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Knock Sensor 2 Components
    GM1480896Courtesy of GENERAL MOTORS CORP.
  1. Remove the right exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (V6) or Exhaust Manifold Replacement - Right Side (V8) .
  2. Remove the right catalytic convertor. Refer to Catalytic Converter Replacement - Right Side (V6) or Catalytic Converter Replacement - Right Side (V8) .
    3. NOTE: In the following service procedure, it maybe necessary to remove the starter assembly to gain enough clearance to remove the knock sensor.
  3. Remove the starter assembly (4), ONLY IF NEEDED. Refer to Starter Replacement (V8) .
  4. Remove the knock sensor mounting (1).
  5. Remove the knock sensor (2) from the engine block (5).
  6. Disconnect the engine electrical connector (3) from the knock sensor (2).
  7. Remove the knock sensor (2).
scientia non olet · About LEMON Manuals