Component Testing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Memory Switch
- Disconnect the X4 harness connector at the door lock/window switch.
- Test for infinite resistance between the signal circuit terminal 5 and the 12 V reference circuit terminal 14 with the switch in the open position.
- If not the specified value, replace the memory switch.
- Test the resistance between terminal 5 and terminal 14 while pressing the memory 1, memory 2, and EXIT buttons. Compare the resistance readings to the values in the Memory Switch Values table below.
- If the resistance is not within the specified range, replace the memory switch.
Memory Switch Values
| Switch Position | Resistance |
|---|---|
| Idle | Infinite |
| Memory 1 | 2.03 k - 2.49 kΩ |
| Memory 2 | 3.83 k - 4.69 kΩ |
| Exit | 9.32 k- 10.18 kΩ |