LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Battery Hold Down Retainer & Bolt
    GM1702812Courtesy of GENERAL MOTORS CORP.
  1. Install the battery.
  2. CAUTION: Refer to Fastener Caution .
  3. Install the battery hold down retainer and the bolt.

    Tighten:  Tighten the retainer bolt to 25 N.m (18 lb ft).

  4. Fig 2: View Of Front Fender Rear Upper Brace & Bolts
    GM1702811Courtesy of GENERAL MOTORS CORP.
  5. Install the right front fender rear upper brace and the bolts.

    Tighten:  Tighten the brace bolts to 9 N.m (80 lb in).

  6. Fig 3: View Of Battery Cable Components
    GM1702504Courtesy of GENERAL MOTORS CORP.
  7. Install the starter solenoid cable to the positive battery terminal.
  8. Tighten the starter solenoid cable nut (5).

    Tighten:  Tighten the solenoid cable nut to 5 N.m (44 lb in).

  9. Close the starter solenoid cable cover at the positive battery terminal.
  10. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .