ECM Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
If the engine control module (ECM) is replaced, the following procedures must be performed:
- The ECM Reprogramming-Refer to Service Programming System (SPS) .
- The CKP Variation Learn-Refer to Crankshaft Position System Variation Learn .
- The Theft Deterrent Programming-Refer to Theft Deterrent Control Module Programming and Setup .
- The Fuel Composition Diagnostic-Refer to Fuel Composition Diagnosis for the 5.3L (LMG or LC9).
- Engine Oil Life Remaining-When available, use a scan tool to reset the Engine Oil Life Remaining back to the original percentage recorded before the module was replaced.
- Transmission Fluid Life Remaining-When available, use a scan tool to reset the Transmission Fluid Life Remaining back to the original percentage recorded before the module was replaced.