Windshield Wiper System Module Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Windshield Wiper System Module Assembly & Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the wiper arms. Refer to Windshield Wiper Arm Replacement (Chevrolet Hybrid Two-mode) or Windshield Wiper Arm Replacement (Conventional) . Remove the air inlet grille panels. Refer to Air Inlet Grille Panel Replacement .
1	Windshield Wiper System Module Assembly Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 9 N.m (80 lb in)
2	Windshield Wiper System Module Assembly Tip: Raise the module and disconnect the electrical connector.

Callout

Component Name

Preliminary Procedure

Remove the wiper arms. Refer to Windshield Wiper Arm Replacement (Chevrolet Hybrid Two-mode) or Windshield Wiper Arm Replacement (Conventional) .
Remove the air inlet grille panels. Refer to Air Inlet Grille Panel Replacement .

Windshield Wiper System Module Assembly Bolt (Qty: 3)

CAUTION: Refer to Fastener Caution .

Tighten: 9 N.m (80 lb in)

Windshield Wiper System Module Assembly
Tip: Raise the module and disconnect the electrical connector.