Liftgate Window Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Liftgate Window & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
WARNING: When a lift gate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Preliminary Procedure Disconnect the liftgate window support struts. Refer to Liftgate Strut Replacement (Except Avalanche and Escalade EXT) . Remove the center high mounted stop lamp applique. Refer to Back Body Opening Upper Applique Replacement . Remove the liftgate garnish molding. Refer to Liftgate Garnish Molding Replacement .
1	Liftgate Window Hinge E-Ring (Qty: 2)
2	Liftgate Window Hinge Bushing (Qty: 4)
3	Liftgate Window Procedure If the HYBRID decal is damaged or if the liftgate window is being replaced, refer to Decal or Stripe Replacement (Tahoe Hybrid 2 Mode Lower Door) or Decal or Stripe Replacement (Tahoe Hybrid 2 Mode Rear Glass) or Decal or Stripe Replacement (Tahoe Hybrid 2 Mode Windshield) or Decal or Stripe Replacement (Escalade HYBRID 2 Mode Door Decal) . Disconnect the rear defogger electrical connector.