Rear Camber Adjustment

Rear Camber Adjustment

Special Tools
* J 45845 Caster and Camber Adjusting Tool
* J-45845-10 Caster and Camber Adjusting Rod




1. Install the J 45845 or the J-45845-10 to the lower control arm and the frame.
2. Loosen the lower control arm to frame bolt.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Adjust the camber angle by turning the turnbuckle on J 45845 or the J-45845-10 until the specifications have been met.

Tighten the bolt to 135 Nm (96 lb ft).

4. Verify that the camber is still with specifications. Refer to Wheel Alignment Specifications (Specifications).
5. Adjust the rear toe. Refer to Rear Toe Adjustment (Service and Repair).