Installation Procedure

Fig 1: Wheel Speed Sensor Bolt

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the wheel speed sensor and bolt (1) to the suspension knuckle and tighten to 9 N.m (80 lb in).

Fig 2: Wheel Speed Sensor Wire Harness Clips

Courtesy of GENERAL MOTORS CORP.

Install the wheel speed sensor wire harness clips (1) to the upper control arm and vehicle frame.
Connect the wheel speed sensor electrical connector (2).
Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .