Liftgate Calibration

If any portion of the power liftgate assembly is replaced, repaired or disassembled, perform the following liftgate calibration procedure:

1. Ensure that the rotary switch on the driver door panel is set to Full Open.
2. Open the liftgate completely using the one of the following switches:
   • The rotary switch on the driver door panel
   • The unlatch switch on the liftgate handle
   • The remote control switch on the key fob
3. Close the liftgate completely using one of the following switches:
   • The rotary switch on the driver door panel
   • The shutface switch on the liftgate
   • The remote control switch on the key fob