Removal Procedure

Fig 1: Identifying PCV Fresh Air Tube

Courtesy of GENERAL MOTORS COMPANY

CAUTION:

Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.

Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
Disconnect the positive crankcase ventilation (PCV) fresh air tube quick connect fittings at the camshaft cover and the air cleaner outlet duct. Refer to Plastic Collar Quick Connect Fitting Service .
Remove the PCV fresh air tube.

Fig 2: Identifying Engine Harness Electrical Connectors

Courtesy of GENERAL MOTORS COMPANY

Disconnect the engine harness electrical connector (5) from the throttle actuator.

Fig 3: Identifying Transaxle Vent Hose Clip

Courtesy of GENERAL MOTORS COMPANY

Remove the transaxle vent hose clip (1) from the shift cable bracket.

Fig 4: Identifying Transaxle Shift Cable

Courtesy of GENERAL MOTORS COMPANY

Remove the transaxle shift cable clip from the shift cable bracket.

Fig 5: View Of Throttle Body Assembly

Courtesy of GENERAL MOTORS COMPANY

Remove the throttle body bolts.
Remove the shift cable bracket.
Remove the throttle body.
Remove and discard the throttle body seal.