Circuit/System Verification
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the rearview camera for any debris on the lens or a damage bezel or bezel seal.
- Clean any debris from the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.
- Ignition ON, vehicle in PARK, verify the backup lamps are off.
- If the backup lamps are illuminated, refer to Rear Vision System Always On in Circuit/System Testing .
- Command the backup lamps ON with a scan tool. A clear rearview image should be displayed on the radio.
- If a clear image is not displayed, refer to Rear Vision System Does Not Display in Circuit/System Testing .
- If the Service Rear Vision Camera System message is displayed, refer to Service Rear Vision Camera System is Displayed in Circuit/System Testing .