LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1871 (Steering Linkage System) >> Repair Instructions >> Relay Rod Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
  2. Remove the steering linkage shock absorber from the relay rod, if equipped. Refer to Steering Linkage Shock Absorber Replacement .
  3. Remove the steering linkage outer tie rods. Refer to Steering Linkage Outer Tie Rod Replacement .
    4. Fig 1: View Of Idler Arm & Relay Rod
    GM1862675Courtesy of GENERAL MOTORS COMPANY
  4. Remove the idler arm nut (6).

    Discard the nut.

  5. Separate the idler arm (1) from the relay rod (5) using the J 24319-B  Puller.
  6. Remove the pitman arm nut (4).

    Discard the nut.

  7. Separate the pitman arm (2) from the relay rod using the J 24319-B  Puller.
  8. Remove the relay rod from the vehicle.
  9. Inspect the threads and seals on all steering related components. Repair or replace the components as necessary.
scientia non olet · About LEMON Manuals