Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Wheel Speed Sensor

Courtesy of GENERAL MOTORS CORP.

Install the wheel speed sensor to the wheel bearing/hub assembly.

NOTE: Refer to Fastener Notice .

Install the wheel speed sensor mounting bolt.
Tighten: Tighten the bolt to 8 N.m (71 lb in).

Fig 2: View Of Front Wheel Speed Sensor

Courtesy of GENERAL MOTORS CORP.

Connect the wheel speed sensor electrical connector.
Install the brake rotor. Refer to Brake Rotor Replacement .
Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
Lower the vehicle.