Windshield Wiper System Module Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Windshield Wiper System Module Assembly & Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the wiper arms. Refer to Windshield Wiper Arm Replacement (LD) or Windshield Wiper Arm Replacement (HD) . Remove the air inlet grille panels. Refer to Air Inlet Grille Panel Replacement .
1	Windshield Wiper System Module Assembly Bolt (Qty: 3) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Windshield Wiper System Module Assembly Tip: Raise the module from the plenum and disconnect the electrical connector from the I/P harness.

Callout

Component Name

Preliminary Procedure

Remove the wiper arms. Refer to Windshield Wiper Arm Replacement (LD) or Windshield Wiper Arm Replacement (HD) .
Remove the air inlet grille panels. Refer to Air Inlet Grille Panel Replacement .

Windshield Wiper System Module Assembly Bolt (Qty: 3)

NOTE: Refer to Fastener Notice .

Tighten: 9 N.m (80 lb in)

Windshield Wiper System Module Assembly
Tip: Raise the module from the plenum and disconnect the electrical connector from the I/P harness.