Remote Control Door Lock Receiver Replacement (TPM Sensor Learn)
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
This procedure will learn TPM information to the new RCDLR by manually inputting the tire type using the scan tool and performing the TPM sensor learn. This procedure should be performed if the above Copy and Paste procedure can not be completed. An example of this would be an RCDLR that is unable to communicate with the scan tool and is required to be replaced.
- RCDLR Programming-Refer to Service Programming System (SPS) .
- Keyless Entry Transmitter Programming-Refer to Transmitter Programming (without RPO Y41) or Transmitter Programming (with RPO Y41 - North America and Asia) .
- Tire Type Setup:
- Install a scan tool.
- Select Remote Control Door Lock Receiver under Module Setup in the Vehicle Control System menu.
- Select Tire Type/Pressure Selection.
- Follow the on-screen instructions.
- Tire Pressure Monitoring Sensor Learn-Refer to Tire Pressure Sensor Learn (W/O UH3) or Tire Pressure Sensor Learn (W/UH3) .