Garage Height Calibration

If any portion of the power liftgate assembly is replaced, repaired or disassembled, perform the following liftgate calibration procedure:

1. Ensure that the rotary switch on the driver door panel is set to Garage.
2. Open the liftgate to the desired height manually or by using the one of the following switches:
   • The rotary switch on the driver door panel
   • The unlatch switch on the liftgate handle
   • The remote control switch on the key fob
3. Hold the shutface switch for at least 3 seconds with the liftgate at the desired height.
4. Close the liftgate completely using one of the following switches:
   • The rotary switch on the driver door panel
   • The shutface switch on the liftgate
   • The remote control switch on the key fob