Installation Procedure
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the shackle to the spring.
- Install the shackle nut and bolt to the spring.
Tighten: Tighten the shackle nuts to 95 N.m (70 lb ft).
- Install the leaf spring assembly to the vehicle. Refer to Leaf Spring Replacement .
- Remove the safety stands.
- Lower the vehicle.
NOTE:
Refer to Fastener Notice
.