LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1109 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Heat Shield Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Heat Shield
    GM1296794Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure the openings in the heat shield are aligned with the battery terminal bosses.
  1. Position the battery heat shield downward over the battery.
    2. Fig 2: View Of Battery Heat Shield Locking Tabs
    GM1296793Courtesy of GENERAL MOTORS CORP.
  2. Ensure that the heat shield locking tabs (1) are engaged.
    3. Fig 3: View Of Battery Positive & Negative Cables
    GM1296154Courtesy of GENERAL MOTORS CORP.
  3. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
    4. NOTE: Refer to Fastener Notice .
  4. Connect the battery positive cable (1) to the battery.

    Tighten:  Tighten the battery positive cable to 17 N.m (13 lb ft).

  5. Connect the battery negative cable (2). Refer to Battery Negative Cable Disconnection and Connection (Side Post) .
scientia non olet · About LEMON Manuals